Model DDF-G Series Grilles—

Model DDF-GF grilles have a mitered, offset, galvanized sheet metal (optional paintable galvanized steel, 304 and 316 stainless steel, and aluminum) frame for easy installation on a round, flat oval, or rectangular duct assembly or fitting body using sheet metal screws.

The Model DDF-GOBD grille (not available in aluminum) incorporates an integrated, opposed blade damper for balancing volume flow rates among grilles.

Type A framed grille

There are 31 standard sizes. The Model DDF-GF grille can be field or factory installed. Factory-installed units incorporate closed cell foam gasketing for a dust-free seal.

Model DDF-GF (framed grille, mounted on duct)

Model DDF-GOBD (framed grille with integrated, opposed blade damper, mounted on duct, adjustable volume flow rate)

Available Sizes for DDF-G Grilles Available sizes of the DDF-G Grille
SilverGuard fittings
 

 
McGill AirFlow's Duct-D-Fuser™ Terminal Outlets:

Model DDF-G Series Grilles
Model DDF-G Series Assemblies
Model DDF-G Series Fittings
Type SP In-Duct Fitting
Type SP Assembly
Model DDF-R Series Deflection Registers
Model DDF-RLS Series Linear Slot Registers
Model DDF-RD Series Drum Registers
Performance of DDF Grilles and Registers

  

© 2002-2012 McGill AirFlow LLC
An enterprise of United McGill Corporation—Family owned and operated since 1951

Unless otherwise noted, all (™) trademarks and (®) registered trademarks are property of United McGill Corporation.